Co. Antrim, Northern Ireland

  • Black Facebook Icon
  • Black Twitter Icon
Rekindled Rag Newsletter

© 2013-2019 all rights reserved
Rekindled Yard

click here to register for the Rekindled Rag Newsletter

“The other day when I was walking through the woods, I saw a rabbit standing in front of a candle making shadows of people on a tree.”

(Stephen Wright, Comedian)

click on main images to view full screen

"Embrace" Tea Light Candle Holder Set

 

This chunky pair started as one log (Laburnum Tree "Golden Chain"), with an almost definitive split - holding together by splinters!  Mr RY gently teased the winding split, to divide into two.  Gently smoothed, while clamped together in their original state, to retain the "embrace" and sealed in bees wax to highlight the stunning grain and colours in the timber - inside and out.  Stunning "2 for 1" piece, offering multiple display options - together or as two candle light holders. 

 

Dimensions: overall 20cm / 8in at widest, 18cm / 17in tall

£25

Candle Care

 

Careful with your candles

Always use a candle holder

Never place near flammable objects/furnishings

Do not place near drafts and vibrations

Level and stable, fire resistant surfaces only

Extinguish before leaving unattended

Set out of reach from children and pets

*Top Tip * trim wicks to ¼ inch

long or crooked wicks can cause

uneven burning and drips

"Tree Trunk" Tea Light Candle Holder

 

This stunning "slice" retains its natural bark to offer a truly rustic centrepiece.

 

Carefully smoothed by hand (just the top!) before being lathered in numerous coats of danish oil, to seal and highlight the stunning grain and bark.

 

Dimensions: 15cm / 6in at widest point, 22cm / 8.5in long, 5.5cm / 2.5in at tallest point

£15

Combo Candle Holder

 

Solid Oak Driftwood, smoothed by hand to reveal the stunning twists and turns of this gorgeous piece of timber.

 

Lathered in Mr RY's 50/50 mix of boiled linseed & teak oil to highlight and protect the stunning grain.

 

Dimensions: 52cm / 20.5in long, 8cm / 3.5in wide, 7cm / 3in high

£30

"Puddles" Chunky Pair Tea Light Candle Holder Set

 

This chunky pair were carefully smoothed by hand, from Live Edge Holly Tree, to emphasise and retain the original bark and shape.

 

Sealed with bees wax, the natural grain is highlighted by the gentle light from the inset tea lights above.

 

Dimensions:

wee puddle - 10cm / 4in at widest, 3cm / 1.5in tall

big puddle - 17cm / 6.5in at widest, 8cm tall

£14 (pair)

White Oak Antrim Coast Driftwood Tea Light Holder

 

Quercus alba, the white oak, is one of the pre-eminent hardwoods of eastern North America. It is a long-lived oak of the family Fagaceae, native to eastern North America and found from southern Quebec, west to eastern Minnesota and south to northern Florida and eastern Texas. Specimens have been documented to be over 450 years old and this particular piece bounced about the oceans until it reached the Antrim coast. From there it was rescued by Rekindled Yard, cleaned and dried over 4 months then smoothed and sanded to accentuate the shape. Finished in five coats of Mr RY's mix of lemon and danish oils, to show the outstanding beauty of this wood.

 

Dimensions:  23 x 15cm  (approx 8cm tall)

£15

Rustic Pillars Candle Holder Sets

 

The scandanavian pine pieces were finely sanded by hand, for those "truly rustic" fans, retaining the natural knots and cracks.

Order from 2nd photo:
Au Naturel, bare timber (7cm square; 4cm, 6cm & 10cm tall)
Teak Oil (7cm square; 7cm, 10cm & 12cm tall)
Jacobean Dark Oak Wax (8cm square; 10cm, 11.5cm & 16cm tall) 
Natural Wax (7cm square; 6.5cm, 12.5cm & 15cm tall)

£12

Hand Carved Spalted Ash Tea Light Holder

 

This began as a lonely log, recovered from the Antrim Coast.

 

Carving by hand, the existing natural twist was carefully accentuated to bring out the beauty of this piece. It was then sanded by hand to a very fine finish before being lathered in numerous coats of danish oil, to seal and highlight the stunning spalted grain.

 

Dimensions: approx 30cm tall, 15cm at widest point

£15

Heart Tea Light Candle Holder

 

The hand carved love heart was finished in three layers of Danish Oil, to enhance the wood grain as well as to protect the piece.

 

Great for a Wedding, Anniversary or Valentine Gift.

 

Dimensions:

approx 6.5in / 16cm at widest point, approx 8in / 20cm at longest point, approx 2.5in / 6cm depth / tall

£20

"Tea for Two" Hand Crafted Candle Holder

 

This chunky log was carefully smoothed by hand to emphasise and retain the original bark and unusual shape.

 

Sealed with a mix of teak and linseed oil, the natural grain is highlighted by the gentle light from the inset tea lights above.

 

Dimensions: 14cm / 5.5in tall, 10cm / 4in wide

£12

"Tea for Four" Candle Holder

 

This piece was created by recycling an old scaffold plank.  Smoothed & shaped to hold four tea light candles, this piece was given extra "character" with some shaping, by hand, offering a driftwood style finish.  Finished in stripped pine wax to seal the timber and highlight the gorgeous grain.

 

Dimensions: 55cm / 21.5in long, 14cm / 5.5in wide, 6cm / 2.5in high

£35

Mini "Golden Chain" Slices - Tea Light Candle Holders

 

Laburnum Tree (Golden Chain)

 

Versatile ambience, perfect for any space - as required!

These stunning slices retain their "live edge" to offer a truly rustic centrepiece.

 

Carefully smoothed by hand (just the top!) before being sealed to highlight the stunning grain and bark.

 

Approx dimensions: 10-12cm / 4-5in at widest, 2cm / 0.75in tall

£6 each

Rustic Pillars Candle Holder Sets

 

The scandanavian pine pieces were finely sanded by hand, for those "truly rustic" fans, retaining the natural knots and cracks.

Set 1 - sealed with wax, emphasises the gorgeous grain.

Set 2 - lashings of danish oil to highlight the stunning colours.

 

Dimensions: 6.5cm / 2.5in square > Large pillars - 17cm / 6.5in tall, Small pillars - 14.5cm / 5.5in tall

£15 (set of two)

Chunky Taper Candle Holder

 

This gorgeous piece of spalted Ash was finely sanded to retain the natural knots and shape.

 

Sealed with lashings of danish oil, this chunky candle holder is perfect for some mood lighting or a centre piece for your dinner table!

 

Dimensions:

16cm / 6.5in tall, 12cm / 4.5in wide

£12

White Oak Antrim Coast Driftwood Taper Candle Holder

 

Carefully smoothed by hand, the shape of this gorgeous piece of driftwood lends itself perfectly for candles, displayed perhaps on a hearth or as a table centre.

 

Rescued by Rekindled Yard from the Antrim coast... dried, carved to shape & sanded smooth to highlight the grain.

 

Dimensions:  25 x 15cm  (approx 4cm tall)

£15

"Tree Stump" Tea Light Candle Holder 

 

This stunning "stump" retains its natural bark to offer a truly rustic centre piece.

 

Carefully smoothed by hand (just the top & base!) before being lathered in numerous coats of danish oil, to seal and highlight the stunning grain and bark.

 

Dimensions: 12cm / 5in at widest point, 24cm / 9.5in long, 7cm / 3in at highest point

£15

"Tea for Three" Tea Light Candle Holder

 

This piece was created by recycling an old scaffold plank.

 

Smoothed & shaped to hold three tea light candles, this piece was given extra "character" with Mr RY's faithful chisel, offering a driftwood style finish.

 

Lathered in Danish Oil to seal the timber and highlight the gorgeous grain.

 

Dimensions: 42cm / 16.5in long, 10cm / 4in wide, 5cm / 2in high

£30

"Tea for One" Hand Crafted Candle Holder

 

This chunky log was carefully smoothed by hand to emphasise and retain the original bark and unusual shape.

 

Sealed with a mix of teak and linseed oil, the natural grain is highlighted by the gentle light from the inset tea lights above.

 

Dimensions: 12cm / 4.5in tall, 14cm / 5.5in at widest

£12

Hand Crafted Pair of Tea Light Candle Holders

 

This pair of chunky logs were carefully smoothed by hand to emphasise and retain their original, unusual shape.

 

Sealed with oil, the natural grain is highlighted by the gentle light from the inset tea lights above.

£25 (pair)

"Tapers & Teas" Candle Holder Set

 

This pair will look delightful in any space & perfect for candle lovers... who just cannot decide between Tapers or Teas !?!

 

The spalted Ash pieces were finely sanded by hand to retain the natural knots and cracks and lashings of danish oil emphasises the spalting in the grain.  Finished with seagrass, wrapped and tied in a knot, this pair will look stunning in any space.

Dimensions:

Large - 26cm / 10.5in tall, 7cm / 3in wide

Small - 11cm / 4in tall, 8cm / 3in wide

£20 (pair)

"Chunky Taper & Tea" Tea Light Candle Holder Set

 

This chunky pair were carefully smoothed by hand, from Live Edge Holly Tree, to emphasise and retain the original bark and shape.

 

Sealed with bees wax, the natural grain is highlighted by the gentle light from the inset tea lights above.

 

Dimensions: 3cm / 1.5in tall

double holder - 12cm / 4.5in at widest  /  single holder - 9cm / 3.5in at widest

£14 (pair)

"Tapers & Teas" Candle Holder Set

 

This pair will look delightful in any space & perfect for candle lovers... who just cannot decide between Tapers or Teas !?!

 

The spalted Ash pieces were finely sanded by hand to retain the natural knots and cracks and lashings of danish oil emphasises the spalting in the grain.  Finished with seagrass, wrapped and tied in a knot, this pair will look stunning in any space.

Dimensions:

Large - 26cm / 10.5in tall, 7cm / 3in wide

Small - 11cm / 4in tall, 8cm / 3in wide

£20 (pair)

“Tea for Three” Tea Light Candle Holder

 

This table top taper candle holder was created from our fallen Victoria plum tree... continuing life, the Rekindled way!


The spalted timber brings out beautiful colours in the wood, emphasised with layers of boiled linseed oil - to really highlight the stunning shades.

23cm / 8.5in x 19cm / 7.5in x 4cm / 1.5in

£20